Builder for radio -controlled boat Boat Boat Fishing Surfer + TF300 echrosurer

FISHING SURFER Baiting Boat + TF300 Depth Sounder

This 850 class baiting boat is designed to face the waves and allow anglers to drop their lines and bait 150/200 meters from the shore without worry.
The boat is equipped with a GPS, so with the push of a button it returns to its starting point. Another GPS feature is that 4 different release points can be memorized, with one press of a button the boat will automatically reach a memorized release spot.
The model delivered under this reference is additionally equipped with a TOLSON TF300 echo sounder which has been installed and programmed in the factory.

Features :

    Length: 850mm
    Width: 205mm
    Height: 230mm
    Weight: 3.6kg
    Speed: 4 meters per second
    Powered by 2 brushless motors with ducted propellers
    15600mAh LiFePo battery for a very long autonomy supplied with its charger
    Battery charge level of the boat displayed on the remote control
    2.4Ghz radio for interference-free operation
    Remote controlled release of baits
    Hook under the hull to carry your lines to a long distance
    Blue and red lights for night use!
    Hull inspired by deep sea rescue boats, automatically resets in case of capsizing
    GPS system allows the boat to automatically return to the starting point at the touch of a button
    GPS system with memory of 4 release points, to send the boat automatically to the right position
    Rubber bow protectors
    Cradle included
    Free carry bag!


Features of the TOLSON TF300 Fishfinder:

    The TF300 is a 3rd generation wireless echo sounder, a sonar technology optimized for carp fishing use.
    The setting for shallow / medium / deep water mode is easy to use.
    The user can update the display and transmitter software (CCU) with a built-in SD card.
    The display fits on most radio controls with an additional bracket.

FISHING SURFER WARNING
Please note that Fishing Surfers are often used in salt water for deep sea fishing. Salt water damages metal parts very easily if you do not use fresh water to rinse the parts after each trip. sea ​​fishing.
It is therefore imperative after each outing in salt water, even if it is only for a few minutes, to rinse all the exterior parts of the hull with clear water, in particular the propellers, propeller shafts and bearings, and the entire hull.
It is also imperative to open the deck hatch and check whether or not the parts in the hold, including the engines, have been in contact with salt water. In this case, it is imperative to evacuate the salt water that has penetrated the hull, to remove the excess salt with a cloth moistened with clean water and then to dry all the parts that have been in contact with the salt in order to prevent corrosion or deterioration of parts.

The company JOYSWAY and its distributor decline all responsibility in the event that these precautions are not respected and that parts of the boat are damaged in contact with salt water.
Engines and other spare parts that have been damaged by salt water are not guaranteed on this boat.